In the world of pools, it’s easy to become overwhelmed by the sheer volume of maintenance that needs to be completed on a regular basis. Whether you have a large commercial pool or something smaller, like a backyard oasis, there are always things that need attention. This is when Pool Service Adelaide comes in. Luckily for you, we’ve done all of the legwork for you so that your pool stays in tip-top shape!

Top 4 DIY Pool Maintenance Tips

Have a pre-season inspection by a professional pool service.

Having a pre-season inspection by a professional Pool Service Adelaide wide is an important step that every owner should take. The inspection will help you identify any potential problems before they become major issues, like leaks in the pool or cracks in the liner. It’s also important to understand what maintenance schedule works best for your family and budget.

This is especially true if you have young kids who love playing around in the water. You should have them wear life jackets at all times while swimming because accidents can happen when children are unsupervised (or even supervised).

Check the water level before and after every use.

The water level in your pool can fluctuate throughout the day, so it’s important to check it before and after every use. You should also check it before and after a storm since storms can cause sudden rises in temperature that can lead to evaporation.

If you’re hosting an event at your pool, such as a birthday party or even just a casual gathering with friends, then make sure that all guests have been told about your water-level rules and expectations. This will help ensure that no one gets hurt by slipping on wet cement or stepping into deep puddles of water—and if someone does get hurt by these things happening around them (which could happen!), then let them know how much responsibility they have for their own safety when using this space! If someone does slip on wet cement or step into deep puddles of water during these times, it’ll be up to them whether or not they want help getting out safely from underneath what happened.”

Check the water chemistry every week.

Pool Service Adelaide

The first thing you should do when checking your pool’s water chemistry is to make sure it’s clean. You can do this by using a cleaning kit that includes a filter and test strips or by hand-washing the filters and tested them on paper towels before you put them back into place.

Once all of that’s done, take some time to look at the pH levels of your pool water—if they’re too high or low (or even just off), it could lead to problems for both your pool surface and equipment in one way or another. Remember that chlorine levels should generally stay below 1 ppm (parts per million); if they’re higher than this amount during any given week, they could damage both surfaces as well as any electrical components installed within them!

Clean the pump basket every week.

In order to keep your pool pump running smoothly, you need to clean the basket very often. This can be done by removing anything that might be clogging up or damaging the pump’s impeller blades. A good way of doing this is by using a garden hose with a nozzle attachment on it and spraying some dish soap directly into each end of your pump’s internal basket. Make sure you get into every nook and cranny before moving onto any other parts of your equipment!

If it becomes necessary for you to clean out more than just one section of your pool system at once (for example: after replacing an entire filter), make sure all parts are cleaned thoroughly before moving on with another step in this process again—this will help ensure there aren’t any more unwanted debris left behind once everything else has been taken care off the first time around.”


Pool maintenance is an important part of keeping your pool clean and safe. It’s always a good idea to have a professional Pool Service Adelaide come check out your pool once or twice a year, but if you don’t have the time or energy to do it yourself, then try these tips before calling in the pros!